Filter
Top Products
3 - 3
Beeper - Transmit Order
The beeper transmit order determines when the good read beep occurs.
The engine can be set to emit the good read beep either before or after
data transmission.
Default = Before Transmission.
Beeper Pitch – Error
The beeper pitch codes modify the pitch (frequency) of the sound the
engine emits when there is a bad read or error.
Default = Razz.
Beeper Duration – Good Read
The beeper duration codes modify the length of the beep the engine emits
on a good read.
Default = Normal.
* Before Transmission
After Transmission
* Razz (100 Hz)
Medium (2000 Hz)
High (4200 Hz)
* Normal Beep
Short BeepShort Beep