Filter
Top Products
ACCESSORIES
C-9 C-9
COMPACT WIRE WELDERS
5. Remove screws from cover.
(A) is the location of two 3/4” long screws.
6. Remove cover.
7. If machine has a plastic handle (A), then remove
screw (B).
SPOOL GUN / WIRE DRIVE
SELECTOR SWITCH INSTALLATION
1. Install the M21182 electrical adapter harness that
came with the spool gun per the following instruc-
tions.
ELECTRIC SHOCK CAN KILL.
2. Disconnect input power from the machine.
------------------------------------------------------------------------
OPEN THE MACHINE
3. Remove two 5/16“ hex hinge screws from door.
4. Remove ten 5/16“ hex screws from cover.
A
A
B
WARNING
Return to Section TOC Return to Section TOC Return to Section TOC Return to Section TOC
Return to Master TOC Return to Master TOC Return to Master TOC Return to Master TOC