Filter
Top Products
2 Phillips
Screws
4 Phillips Screws
(only found on 140c/180c models)
Phillips Handle Mount Screw
(only found on 140c/180c models)
VIEWED FROM REAR OF MACHINE
FIGURE F.16 – CENTER PANEL/FAN MOUNTING SCREW LOCATION
FAN MOTOR ASSEMBLY REMOVAL AND REPLACEMENT PROCEDURE
(CONTINUED)
TROUBLESHOOTING & REPAIR
F-44 F-44
COMPACT WIRE WELDERS
1. Remove the input power to the machine.
2. Perform the Case Cover Removal Procedure.
ELECTRIC SHOCK can kill.
•
Have an electrician install and
service this equipment. Turn the
input power OFF at the fuse box
before working on equipment. Do
not touch electrically hot parts.
------------------------------------------------------------------------
3. Perform the Control Board Removal Procedure.
4. Using a flathead screwdriver, remove the center
panel mounting screws and the fan mounting
screws (depending upon model) located on the
back of the machine. See Figure F.16.
5. Depress any necessary locking tabs on rear of
machine.
WARNING
Return to Section TOC Return to Section TOC Return to Section TOC Return to Section TOC
Return to Master TOC Return to Master TOC Return to Master TOC Return to Master TOC