Filter
Top Products
Dow Corning 340
(Apply to area, opposite side not shown))
FIGURE F.11 – DOW CORNING 340
RECTIFIER, TRANSFORMER, CHOKE ASSEMBLY & CAPACITOR
REMOVAL AND REPLACEMENT PROCEDURE (CONTINUED)
8. When re-installing the capacitor, make sure that the
polarity is NOT reversed. See Figure F.12.
9. Clean the terminal surface of the capacitor with fine
steel wool and apply a thin coating of Dow Corning
340. See Figure F.12.
10. On the rectifier, clean the terminal surface with fine
steel wool and apply a thin coating of Dow Corning
340 on the Rectifier and re-install. See Figure F.11.
TROUBLESHOOTING & REPAIR
F-35 F-35
COMPACT WIRE WELDERS
Return to Section TOC Return to Section TOC Return to Section TOC Return to Section TOC
Return to Master TOC Return to Master TOC Return to Master TOC Return to Master TOC