Filter
Top Products
Return to Section TOC Return to Section TOC Return to Section TOC Return to Section TOC
Return to Master TOC Return to Master TOC Return to Master TOC Return to Master TOC
OUTPUT RECTIFIER BRIDGE REMOVAL AND REPLACEMENT (continued)
11. With the 7/16" wrench, install the choke
lead and the #203 lead to the positive
heat sink.
12. With the 7/16" wrench, install the "N"
negative lead and the #204 lead to the
negative heat sink.
13. With the 7/16" wrench, install the heavy
leads W1 and W2 to the stud terminals.
14. Replace the top cover of the control box
and tighten the 8 sheet metal screws with
the 5/16" nut driver.
TROUBLESHOOTING & REPAIR
F-49 F-49
WELDANPOWER 125