Filter
Top Products
11
THANK YOU FOR PURCHASING AN STERLING BP2400 SERIES GRANULATOR.
READ THIS MANUAL to learn how to operate and service your granulator safely. It covers the
family of granulators called the BP2400. This series of Sterling Granulators is designed for the
big jobs in reclamation of large blow-molded and thin walled, injection molded plastic parts as
well as film.
This revision of the manual covers the improvements made since the introduction of the
BP2400 Series Machines in 1993.
NOTE: This manual covers light maintenance only. No further maintenance should be performed
without first contacting the Sterling Service Department at the mailing address and phone number
shown on page 2.
When calling the factory for service information and parts, please have the model and serial
number of your machine on hand. The serial number is stamped on the plate mounted on the
center at the back of the granulator just below the hopper.