Filter
Top Products
44
SETTINGS AND ADJUSTMENTS
SECTION 4-9
Adjusting or Replacing Bed Knives
FASTEN THE CUTTING CHAMBER
Raise the hold-down clamps to their upright
positions
Turn the knobs clockwise until they are tight
against the chamber housing.
CLOSE THE CUTTING CHAMBER SAFETY
INTERLOCK
Engage the safety interlock by turning the
actuator screw clockwise with a box wrench or
a ratchet wrench
Make sure the screw is fully seated against the
top surface of its housing.
When engaged, the interlock closes the electrical
control circuit to the motor and allows the machine to
run.
RESTART THE GRANULATOR
If necessary to replace the fuses, call an electrician to do it.
UNLOCK AND TURN ON the main power.
Remove the OUT OF SERVICE tag.
Start the granulator by depressing the start pushbutton on the electrical cabinet.