24
MACHINE AND CONTROLS
SECTION 2-1
BP 2400 Series Granulator -Left Front Quarter View
1.
Hold-down clamps - cutting chamber
2. Screen cradle retainers
3. Interlock actuator screw - cutting chamber
4. Safety plates
5. Feed hopper
6. Rotor bearing housing
7.
Discharge duct (pipe not shown-optional mount to either side)
8. Start/stop pushbuttons are located on the electrical cabinet, not shown. (The electrical cabinet is
optional equipment.)
9. Cover, mounting bracket limit switch, jackscrew opening only.
BP 2400 Series Granulators The BP 2400 Series Granulators have a common cutting diameter of
23.6"(600mm) and a common throat size of 24" (610mm) by widths ranging up to 56" (1420mm).
They are designed for reclamation of large blow-molded and thin-walled injection molded-parts,
films, and fibers.
The machines in the BP-Series can be fitted with screens having hole sizes to suit the particular
application. The BP-Series machines conform to ANSI Standards: B 151.11 and NFPA 79.