Filter
Top Products
85
MAINTENANCE
SECTION 6-8
Screen Replacement
CLOSE THE SCREEN CRADLE INTERLOCK
Engage the interlock screw by turning it clockwise with a
box wrench or a ratchet wrench.
Make sure the interlock actuator screw is fully seated
against the top surface of its housing.
When engaged, the interlock switch closes the electrical control
circuit to the machine and allows it to operate.
RESTART THE GRANULATOR
If necessary to replace the fuses, call an electrician to do it.
UNLOCK AND TURN ON the main power.
Remove the OUT OF SERVICE tag.
Start the granulator by depressing the start pushbutton on the electrical cabinet.