Filter
Top Products
Preparing for Installation
18
Performance Route Processor Installation and Configuration Guide
OL-11656-01
Compact Flash Disk
The PRP-2 optionally includes a 1-GB compact flash disk that is installed on the
PRP-2 board.
Note Non-Cisco compact flash disks are not supported.
Preparing for Installation
Installation preparation is presented in the following sections:
• Safety Guidelines, page 18
• Preventing Electrostatic Discharge, page 19
• Required Tools and Equipment, page 20
• Working with Electrical Equipment, page 20
Safety Guidelines
Before you perform any procedure in this publication, review the safety
guidelines in this section to avoid injuring yourself or damaging the equipment.
The following guidelines are for your safety and to protect equipment. The
guidelines do not include all hazards. Be alert.
Note Review the safety warnings listed in the Regulatory Compliance and Safety
Information for Cisco 12000 Series Internet Router publication (Document
Number 78-4347-xx) that accompanied your router before installing, configuring,
or maintaining a line card.
• Keep the work area clear and dust free during and after installation. Do not
allow dirt or debris to enter into any laser-based components.
• Do not wear loose clothing, jewelry, or other items that could get caught in
the router while working with line cards.