Cisco Systems PRP-1/R= Router User Manual


 
Checking the Installation
28
Performance Route Processor Installation and Configuration Guide
OL-11656-01
Figure 7 PRP Alphanumeric Display LEDs (Vertical View)
1 Upper (or left if horizontal) LED Display 2 Lower (or right if horizontal) LED Display
Table 2 PRP Alphanumeric Display LED Sequences
LED Display Description
MROM
nnnn
PRP microcode loads into MBus random-access memory (RAM); where nnnn
is the microcode version. For example, Microcode Version 1.17 displays as
0117.
1
1. The version of microcode running on your PRP might be different.
RP
RDY
The ROMMON for this PRP is enabled and recognized by the system.
ACTV
RP
Cisco IOS is enabled and this PRP is the active PRP.
STBY
RP
Cisco IOS is enabled and this PRP is in standby mode.
70694
PROCESSOR 1 (PRP-1)
1
2