Filter
Top Products
NON-THROUGH CUTS
See Figure49.
,_ WARNING: Unplug the saw while removingor
replacing the blade guard. Turn on the saw with
the switch on the arm to confirmthe blade is not
receiving power.
• Remove the blade and blade guard (see Assembly
section).
• Place a supportthe same heightas the saw table
nearby for thecut work. Lowerthe blade withthe
elevating handwheel.
• Make sure the wood is nottouchingthe blade.
Insertthe key and turnon the sew. Letthe blade
buildup to full speed beforecontactingthe work-
piece,
WARNING: Always use pushblockswhen
making non-throughripcutsto avoid the riskof
serious injury.Never feed wood withyour hands.
• When the work iscompleted, press the switchoff
and remove the key,
NON-THROUGHCUT
Fig. 49
Control Settings
Crosscut
Wood ISetling I Feet
Type Position Minute
Hard A
Medium B 0-0260
Sott C 0-35
B =vel Crossc Jt
Wood Setting Feet
Type Position Minute
All Types A 0-6
53 rllllPTSNRIr RADIALSAW315,_)0381