Filter
Top Products
PROBLEM CAUSE SOLUTION
Saw blade tends to push woodto 1. Blade is heeling. 1. See Squaring the Blade to the
one side when cross cutting. Fence in Adjustmentssection.
2. Column tube is loose in column 2. See Adjustingthe Column
support. Tubein Assemblysection.
3. Arm is looseor misaligned. 3. See Setting theArm Lock
Wheel in the Assemblysection.
4. Fence/tables are notstraight. 4. Check with square; sand or
replace.
5. Blade or teeth are bentor dull. 5. Sharpen or replace the blade.
See the removalprocedure in
Assembly section.
59 rRAFt'_;MAN"RADIALSAW315.220381