Ricoh feeder Welder User Manual


 
Clearing Misfeeds
106
6
Removing Jammed Staples
This section explains how to remove jammed staples.
R
CAUTION:
Important
Curled paper may cause staples to jam. To avoid this, turn copy paper over
in the tray.
When the finisher is installed, after removing jammed staples, staples will not
be ejected the first few times you try to use the stapler.
Remove the jammed staples according to the finisher type. (Check the type if
you are unsure.) For details about type of finisher, see “Options”, About This
Machine.
Finisher
The following procedure explains how to remove jammed staples from the Finisher.
Keep your hands clear of the booklet finisher tray when pulling out or push-
ing in the finisher's staple unit. You can trap your fingers if you do not.
ANR022S