Filter
Top Products
Remarks
114
7
Maintaining Your Machine
If the exposure glass or ADF belt is dirty, copy clarity may be reduced. Clean
these parts if they are dirty.
Important
❒ Do not use chemical cleaners or organic solvents, such as thinner or benzene.
If such substances get inside the machine or melt plastic parts, a failure might
occur.
❒ Do not clean parts other than those explicitly specified in this manual. Other
parts should only be cleaned by your service representative.
❖ How to maintain
Cleaning the machine Wipe the machine with a soft, damp cloth, and then
wipe it with a dry cloth to remove the water.
Cleaning the Exposure Glass
The following procedure explains how to clean the exposure glass.
Wipe the surface of the exposure glass.
Cleaning the Auto Document Feeder
The following procedure explains how to clean the ADF.
Wipe the surface of the belt, moving it.
ANQ080S
ANQ081S