Filter
Top Products
Troubleshooting When Using the Copy Function
26
2
If You Cannot Exit from Connect Copy
This section explains about causes and remedies if you cannot exit from Connect Copy.
Problem Cause Solution
There is no response when
you press
[
Connect Copy
]
.
Scanning is in progress. Press the {Stop} key on the main ma-
chine, and then press [Stop].
There is no response when
you press
[
Connect Copy
]
.
Copying is in progress. Press the {Stop} key on the main ma-
chine, and then press [Stop].
There is no response when
you press
[
Connect Copy
]
.
A paper misfeed has oc-
curred on either the main
machine or sub-machine.
Follow the instructions displayed.
For details, see p.93 “Removing
Jammed Paper” and p.106 “Removing
Jammed Staples”.
If the sub-machine's display indicates
that a cover is open, follow the instruc-
tions displayed.
There is no response when
you press
[
Connect Copy
]
.
A paper misfeed has oc-
curred on either the main
or sub-machine.
To cancel Connect Copy, Press the
{Stop} key on the main machine, and
then press [Stop].
There is no response when
you press
[
Connect Copy
]
.
A paper misfeed has oc-
curred on one of the ma-
chine, or toner or other
supplies need to be re-
placed.
Follow the instructions displayed.
For details, see p.65 “Loading paper”,
p.87 “Adding Toner”, and p.93 “Re-
moving Jammed Paper”.
There is no response when
you press
[
Connect Copy
]
.
A paper misfeed has oc-
curred on one of the ma-
chine, or toner or other
supplies need to be re-
placed.
To cancel Connect Copy, press the
{Stop} key on the main machine, and
then press [Stop].
There is no response when
you press
[
Connect Copy
]
.
A paper misfeed has oc-
curred during stapling.
Removed the jammed paper.
For details, see p.106 “Removing
Jammed Staples”.
To cancel Connect Copy, press the
{Stop} key on the main machine, and
then press [Stop].