Filter
Top Products
Clearing Misfeeds
108
6
Removing Punch and Staple Waste
This section explains how to remove punch and staple waste.
Note
❒ While “Hole Punch Receptacle is full.” or “Waste Staple Recepta-
cle is full.” is displayed, you cannot use the Punch function or the Staple
function.
Finisher
The following procedure explains how to remove punch and staple wastes from
the Finisher.
• Remove punch wastes
• Remove staple wastes
Note
❒ If the message is still displayed, reinstall the waste box.
ANR02
5
ANR024