Ricoh feeder Welder User Manual


 
Adding paper, Toner and Staples
88
5
Important
Faults may occur if you use toner other than the recommended type.
When adding toner, do not turn off the operation switch. If you do, settings
will be lost.
Always add toner when the machine instructs you.
Do not use recycled toner. This will damage the machine.
During toner adding, the toner bottle is rotating. Do not touch the toner bot-
tle.
If toner remains in the bottle, you cannot remove the bottle. Do not remove
the bottle forcibly.
Be sure to set the new toner bottle in the lower hole first.
Store toner containers in a cool, dry place free from direct sunlight.
Store toner on a flat surface.
Note
If both toner bottles are empty, D will appear.
You can still make about 200 copies after D appears, but replace the toner ear-
ly to copy degradation.
If one of the toner bottle is empty, you can keep copying by using the other
bottle.
You can change the toner bottle during copying.
If toner remains in the bottle, you cannot pull it out.
When you change one toner bottle, do not touch the other one.
Press [System Status] to check contact number for consumables' order. For sys-
tem status, see p.5 “Checking Machine Status and Settings”.