Filter
Top Products
Getting Started Teledyne API - T100H Addendum to T100 Operation Manual)
16
3.1.1. Electrical Connections:
For full details on the electrical connections of the T100H, please refer to the T100 user’s manual (#06807),
Electrical Connections section.
3.1.1.1. External Pump
The T100H is equipped with an external pneumatic pump. This pump is powered separately from the instrument
via it’s own power cord. The pump has no ON/OFF switch and should begin operating as soon as it is plugged
into a live power supply.
WARNING
Check the voltage / frequency label on the rear panel of the instrument and on
the external pump for compatibility with the local power. Do not plug in either
the analyzer or the pump unless the voltages or frequencies are correct.
Power connection must have a functioning ground connection. Do not defeat
the ground wire on power plug.
Turn off analyzer power before disconnecting or
connecting eletrical subassemblies.
Do not operate with cover off.
07265A DCN6038