Filter
Top Products
iii
SAFETY MESSAGES
Important safety messages are provided throughout this manual for the purpose of avoiding
personal injury or instrument damage. Please read these messages carefully. Each safety
message is associated with a safety alert symbol, and are placed throughout this manual;
the safety symbols are also located inside the instrument.
It is imperative that you pay
close attention to these messages, the descriptions of which are as follows:
WARNING: Electrical Shock Hazard
HAZARD: Strong oxidizer
GENERAL WARNING/CAUTION: Read the accompanying
message for specific information.
CAUTION: Hot Surface Warning
Do Not Touch: Touching some parts of the instrument
without protection or proper tools could result in damage to the
part(s) and/or the instrument.
Technician Symbol: All operations marked with this symbol
are to be performed by qualified maintenance personnel only.
Electrical Ground: This symbol inside the instrument marks
the central safety grounding point for the instrument.
CAUTION
This instrument should only be used for the purpose and in the
manner described in this manual. If you use this instrument in
a manner other than that for which it was intended,
unpredictable behavior could ensue with possible hazardous
consequences.
NEVER use any gas analyzer to sample combustible gas(es)!
Note
For Technical Assistance regarding the use and maintenance of this instrument or any other
Teledyne API product, contact Teledyne API’s Customer Service Department:
Telephone: 800-324-5190
Email: api-customerservice@teledyne.com
or access any of the service options on our website at http://www.teledyne-api.com/
07265A DCN6038