WinCHAP User’s Manual Hearing Aid Measurements 99
Other functions in the Set Curve Labels window:
• The Auto Labels selection will automatically set the labels with the
source type, source amplitude, and scaling used with the measurement.
• The Reset Labels button will reset the custom labels to the factory default
settings of “Curve 1”, “Curve 2”, “Curve 3”, etc.
7.4 The Real-Ear Test window
The Real-Ear test window, like the Response Curves test window, lets you dis-
play and save up to 12 real-ear measurements. See Figure 7.4.
Each curve on the graph is labeled with a number. A legend to the right of the
graph identifies each curve including the curve type, source type, and source
level used when taking the measurement.
Figure 7.4—Response Curves window
