WinCHAP User’s Manual The DSL/NAL-NL1 Module 79
Figure 6.4.2—NAL window with measurements
When using WinCHAP to do a research project, it is often useful to be able to
cut and paste the measurement data into a spreadsheet such as Excel. This can
be done in WinCHAP by right clicking on the measurement data. Choose
Copy
All to copy all the displayed measurement data to your computer’s clipboard.
You can then go to your spreadsheet project and use CTRL+V to paste the data
there.
If desired, you can also copy a limited amount of data. Click and hold down
the left button of your mouse and use it to select the data you want to copy.
Unfortunately this data is not visibly highlighted. Then use your right mouse
button and select Copy Selection. This will copy only the selected data to the
clipboard.
6.4.3 Checking Curve Parameters
The NAL-NL1 Parameter window is displayed by clicking View Parameter
Table. See Figure 6.4.3. The Parameter window displays the compression ratio,
crossover frequency, and the recommended gain values for the displayed param
-
eters. Instead of showing an entire gain curve, the Parameters window just
shows the targets for the selected frequencies. The number of target values dis
-
played matches the number of channels selected in the Settings menu.
