28 Office Management WinCHAP User’s Manual
3.3.2.2 To enter an individual hearing aid
1. Locate an existing hearing aid model using the Search button (Section
3.3.6.1) or enter a new model using the procedure described in Section
3.3.2.1).
2. Click Add on the right side of the window to add a new serial number.
This will open the Hearing Aid Information window. See Figure 3.3.2.2.
3. Type in the
Ear, Serial Number, and any other desired information.
Serial Number is the only required field.
4. Click
Save in the Hearing Aid Information window to save the serial
number.
5. Click
New to enter a new serial number.
6. Click
Back to close the Hearing Aid Information window. The new serial
number should be listed.
Figure 3.3.2.2—Hearing aid information window
3.3.2.3 To attach a client
1. Find and highlight the individual hearing aid you would like to attach to
a client. Use the
Search button if necessary. (See Section 3.3.6.1.)
2. Click
Edit to open the selected hearing aid. This will bring up the Hearing
Aid Information window.
