108 The NOAH 3 Module WinCHAP User’s Manual
Figure 8.3—Viewing NOAH audiograms
8.4 WinCHAP Audiograms
Once you have exported a NOAH audiogram to WinCHAP (or if you create an
audiogram for that client inside WinCHAP), it will appear in the WinCHAP
Audiogram Section. If you have any audiograms saved in WinCHAP but not
saved in NOAH 3, you can import them.
To import an audiogram from WinCHAP
1. Click on the WinCHAP Audiogram tab to enter the WinCHAP Audiogram
Section and display the window shown in Figure 8.4.
2. Select the desired WinCHAP audiogram.
3. Click Import Audiogram to NOAH
.
If you don’t see the WinCHAP audiogram you want to import, click Refresh
Audiogram List
. This will update the WinCHAP listing of audiograms.
To open a WinCHAP Audiometric Window, you can either double-click on
the desired audiogram, or click on it once and then click View Audiogram in
WinCHAP. From this window, you will be able to create a target to send to the
analyzer or just send the audiogram to the analyzer. See Sections 5.5.1 and
5.5.2.
