WinCHAP User’s Manual Office Management 33
2. Click New in the top left corner of the window.
Note: If this is your first manufacturer record, you will automatically be
in a blank manufacturer window; you can skip this step.
3. Enter the company
Name (required field), Address, Phone Number, and
any other information you would like to record about the manufacturer.
4. Click
Save. Your record will now be saved.
You can click the
Cancel button in the top left corner of the window to can-
cel the new record without saving.
3.3.3.2 To delete a manufacturer record
1. Find the manufacturer record you would like to delete. Use the Search
button if necessary. (See Section 3.3.6.1.)
2. Click
Delete in the upper toolbar. A box will pop up to confirm your deci-
sion.
3. Click Yes to complete the deletion.
3.3.4 Using the Test Instruments Window
The Test Instruments window gives you a place to store information about the
test equipment you use in your office. You can record the instrument type,
model, serial number, manufacturer, and calibration information.
Figure 3.3.4—The Test Instruments window
