WinCHAP User’s Manual Configuration 17
a picture file of the appropriate size to use for your logo. Make sure to select
Enable Logo to make the logo appear on your printouts.
Click the Report Header tab and input up to three lines to use as the header on
your printouts. To use the header, select Enable Header
.
The General tab lets you set the paper size to be used in your printouts. Select
8.5” x 11” for the standard U.S. paper size or
A4 for the standard European
paper size.
Click Save to store all print settings.
2.5 Date/Time Settings
There are several different ways to display the date format in WinCHAP. To
change the selected format:
1. Open the
Settings menu in the Main Menu.
2. Point at the Date/Time selection.
3. Point at
Date..
4. Choose the desired setting where D = day, M = month, and Y = year.
The following are available:
• mmm/dd/yyyy (Jan/02/1970)
• dd/mmm/yyyy (02/Jan/1970)
• yyyy/mmm/dd (1970/Jan/02)
• mm/dd/yyyy (01/02/1970)
• dd/mm/yyyy (02/01/1970)
• yyyy/mm/dd (1970/01/02)
Your selected date format will automatically be saved. You cannot change the
time format at this time.
