Filter
Top Products
20 CHAPTER 1: 3COM VCX IP TELEPHONY SERVER
Configuring the Date
of an IP Telephony
Server
To modify the configured date of an IP Telephony Server:
1 Log into EMS.
2 From the Explorer tab, navigate to the 3Com VCX IP Telephony Server.
3 From the Properties tab, click Time.
4 From the Date field, enter the new date in the
DD:MM:YYYY format.
5 Click Save All.
Configuring the Time
of an IP Telephony
Server
To modify the configured time of an IP Telephony Server:
1 Log into EMS.
2 From the Explorer tab, navigate to the 3Com VCX IP Telephony Server.
3 From the Properties tab, click Time.
4 From the Time field, enter the new time in the
HH:MM:SS format. You
must use military time (24 hour format).
5 Click Save All.
Configuring the
Timezome of an IP
Telephony Server
To modify the configured timezome of an IP Telephony Server:
Using the
vcx-config-network -- wizard tool is actually preferred if
possible since both the Daylight Savings and Timezone preference are
configured at the same time.
1 Log into EMS.
2 From the Explorer tab, navigate to the 3Com VCX IP Telephony Server.
3 From the Properties tab, click Time.
4 From the Timezone field, double-click the field and choose a new
timezone from the drop-down menu.
5 Click Save All.