Filter
Top Products
Accounting Server Maintenance 41
State Use the State tab to view basic statistics for the accounting server.
Accounting Server
Maintenance
This section provides maintenance tasks that are specific to just the
accounting server.
Restarting the
Accounting Server
To restart the accounting server:
1 From the EMS explorer tree, navigate to the 3Com XML Accounting
Server.
2 Right-click the accounting server and select Maintenance and then click
Hard Restart.
Stopping the
Accounting Server
To stop the accounting server:
1 From the EMS explorer tree, navigate to the 3Com XML Accounting
Server.
2 Right-click the accounting server and select Maintenance and then click
Hard Shutdown.
Table 17 State Tab
Attribute Description Settings
Operational State Indicates the current operational state. Read-only
Reserved Indicates if the object is reserved by another
user.
Read-only
Reserved by Indicates who has reserved the object. Read-only
Software status The current operational state of the entity. If
AdminStatus is down, then OperStatus should
be down. If AdminStatus is changed to up,
through the entity command interface, then
OperStatus should change to up if the entity
is operational; it should remain in the down
state if and only if there is a fault that
prevents it from going to the up state; it
should remain in the notPresent state if the
entity has missing components. If the entity is
operational, but not responding to queries,
the state is notResponding.
Read-only
Usage State Indicates how busy the resource is. Read-only