Filter
Top Products
64 CHAPTER 6: CONFIGURING THE SIP PHONE DOWNLOADER
ifconfig -a
1 Launch EMS and discover the server that the SIP Phone Downloader is
installed on. The navigation tree looks similar to Figure 1.
Figure 1 SIP Phone Downloader Configuration Tab
2 Click 3COM Application Downloader.
3 From the Properties tabs, click Configuration.
4 Set the following attributes by double-clicking each field:
a LocalDeviceNameAdmin — Use //dev//eth1, which is your NIC
device.
Make sure the NIC device has read and write permissions for the
cworks user; otherwise, change the permission on this device or run
this application as the super user.
b LocalIPAddressAdmin — the IP Address of the server the SIP Phone
Downloader is installed on. It picks a default.
c LocalIPPortAdmin — Do not change this since it cannot be
configured on the 3Com phone.
5 Click Save all.