Filter
Top Products
Upgrading a Multiple Site Configuration from 6.0.x to 6.0.y 89
f These options are only available if a file has been selected for upgrade.
The file is trasferred to the server using the SFTP credentials in the
SSH/SFTP Settings tab. 3Com recommends not changing the SFTP
username and password.
Next the upgrade tar file needs to be installed, which is the last step
before the new version becomes active.
g To install the upgrade file on the branch office server, for the branch
office server, click 3Com VCX IP Telephony Server.
h Right-click the 3Com VCX IP Telephony Server, select Install Upgrade
Images, and then click Install System Upgrade.
i To verify the version number of the newly installed software, from the
explorer tree, for the branch office server, click 3Com VCX IP
Telephony Server.
j In the left hand pane, click the Identification tab.
k Click Refresh all to confirm that the latest software has been installed.
If you have another branch office to upgrade in this region, go to
step 25
on page 87.
If this is the last branch office to upgrade for this region, go to step 28
on page 89
.
28 Restart Tomcat on the host regional office VCX call processing server.
a From the EMS client explorer tree, for the host VCX call processing
server, click 3Com VCX IP Telephony Server.
b Right-click 3Com VCX IP Telephony Server, select Web Provisioning,
and then click Enable Web Provisioning.
If you have another branch office to upgrade in a different region, go
to step 25
on page 87.
If you have no more branch offices to upgrade, the upgrade is
complete.