Filter
Top Products
Configuring Authorization Station Agents 21
Configuring
Authorization
Station Agents
In order for this feature to become available (activated), during
installation and initial configuration of the VCX IP Telephony System, IP
addresses needed to be entered when prompted for the
IP Address of
the Authorized Management Stations.
If at least one IP address is
entered then this feature becomes active and only that machine can
manage the server. If no IP addresses for authorized stations are
configured at initial installation, then the feature is not enabled (not
activated).
The Authorized Stations table lists which IP addresses the common agent
accepts SNMP request from. Requests originating from other sources are
dropped. This is a security feature on the common agent.
Adding Authorized
Station Agents
Authorized station agents can only be added if an authorized station
station agent was added when the IP Telephony Server was initially
configured. Up to four authorized station agents can be configured.
To add authorized station agents:
1 From the explorer tree in EMS, click on the IP Telephony Server you want
to add authorized station agents to.
2 From the right-hand pane, click the Authorized Stations tab.
3 Click Add.
The Add row to table window appears.
4 From the IP field, enter the IP address of the server you want to be
allowed as an authorized station agent.
5 From the NetMask field, enter the subnet mask IP address of the server.
6 Click OK.
The authorized agent is added to the table.
Deleting Authorized
Station Agents
To delete an authorized station agents:
1 From the explorer tree in EMS, click on the IP Telephony Server you want
to delete an authorized station agents from.
2 From the right-hand pane, click the Authorized Stations tab.
3 Click the row containing the IP address you want to delete.
4 Click Delete.