Filter
Top Products
38 CHAPTER 3: CONFIGURING THE XML ACCOUNTING SERVER
XML Accounting
Server
Configuration Tab
Descriptions
Enterprise Management Suite (EMS) contains several common
configuration tabs. Most of these configurables must be set to their
initial, default configuration.
Tab Location These tabs are available for the accounting server.
To access these tabs:
1 From the EMS GUI, navigate to the 3Com VCX IP Telephony Server within
the Equipment folder.
2 Click on either the XML Accounting Server tab.
3 From the left-hand of the GUI, select the Properties tab (default).
3 Q Protocol
Configuration
Use the 3 Q Protocol Configuration tab to enable the proprietary 3Q
protocol for the accounting server.
Table 12 3 Q Protocol Configuration Tab
Attribute Description Settings
3QenablesStatus Whether or not 3Q Protocol is enabled. Read-only
default = enabled
ClientThread Number of threads to receive data Integer
Range: 1- 4
default = 2
ControlIPAddress IP address of the Linux workstation
receiving Control Messages.
Read-only
ControlPort Control port number. Read-only
default = 1781
DataIPaddress IP address of the Linux workstation
receiving data.
Read-only
DataPort Data port number. DEFAULT = 1788 Read-only
default = 1786