Filter
Top Products
7
CONFIGURING THE COMMON
AGENT
The Common Agent is referred to as the SNMP Agent in EMS.
Verifying State of
the Common Agent
Use the State tab to view basic statistics for the common agent.
1 Log into EMS.
2 From the Explorer tab, navigate to the 3COM SNMP Agent.
3 From the Properties tab, click State.
4 For a description of each field, see Table 28.
Table 28 Common Agent State Tab
Attribute Description Settings
Operational State Indicates the current operational state. Read-only
Reserved Indicates if the object is reserved by another
user.
Read-only
Reserved by Indicates who has reserved the object. Read-only
Software status The current operational state of the entity. If
AdminStatus is down, then OperStatus should
be down. If AdminStatus is changed to up,
through the entity command interface, then
OperStatus should change to up if the entity
is operational; it should remain in the down
state if and only if there is a fault that
prevents it from going to the up state; it
should remain in the notPresent state if the
entity has missing components. If the entity is
operational, but not responding to queries,
the state is notResponding.
Read-only
Usage State Indicates how busy the resource is. Read-only