Filter
Top Products
Configuring the Back-end Servers 49
6 Click OK.
The authentication server is added to the Authentication Server tab.
Editing
Authentication
Server IP Addresses
To edit an authentication server IP address for the Call Processor using
EMS:
1 Log into EMS.
2 From the Explorer tab, navigate to the 3Com Sip Call Processor.
3 From the Properties tab, click Authentication Servers.
4 Double-click the IP Address under the AuthServerIpAddress column you
want to edit.
5 High-light what you want to edit.
6 Type in the new IP address.
7 Click in a different field to activate the Save all button.
8 Click Save all.
The new IP Address is added to the nmdb.xml file and is listed in the
AuthServerIpAddress column of EMS.
Removing
Authentication
Servers
To remove an authentication server through EMS:
1 Log into EMS.
2 From the Explorer tab, navigate to the 3Com Sip Call Processor.
3 From the Properties tab, click Authentication Servers.
4 Put cursor in the row of the authentication server you want to delete.
5 Click Delete.
The authentication server is removed from the VCX IP Telephony Server.
LocalIpAddress Specifies the Local IP Address
for the authentication server
client.
IP Address String
xxx.xxx.xxx.xxx (0 - 255)
Table 21 Authentication Server Tab Descriptions in EMS
Attribute Description Values