Filter
Top Products
Device Mapping 65
Device Mapping The SIP Phone Downloader application comes with two images:
ndset_boot_19 and nbset_19, and the boot version is a508. All images
need to be stored in the $HOME/sipdl/images.
To configure the device mapping:
1 Launch EMS and discover the server that the SIP Phone Downloader is
installed on. The navigation tree looks similar to Figure 2.
Figure 2 SIP Phone Downloader Device Mapping Tab
2 Click 3Com Application Downloader.
3 From the Properties tabs, click Device Mapping.
4 Set the following attributes by double-clicking each field:
■ BootFilename — SIP phone downloader code and firmware code
provided by the NBX phone. This value should be set to
nbset_boot_19.
■ BootVersion — Version of the firmware code. This value should be
set to a508.
■ ImageFilename — Application code and SIP Phone application. This
value should be set to nbset_19.
5 Click Save all.