Filter
Top Products
60 CHAPTER 5: CONFIGURING THE IP MESSAGING SYSTEM
Configuring Dialing
Domain of IP
Messaging Server
The dialing domain is used as part of a SIP phone number and helps
determines how to route the call.
To configure the dialing domain:
1 Log into EMS.
2 From the Explorer tab, navigate to the IP Messaging System.
3 From the Properties tab, click Call Builder Config.
4 In the SIPDefaultDialingDomain field, type the dialing domain that you
want to apply to the IP Messaging server.
5 Click Save All.
Configuring Call
Processors for IP
Messaging Server
This section provides instructions on how to define the primary and
secondary call processor, which is necessary for call processing.
To configure the call processors associated with this IP Messaging server:
1 Log into EMS.
2 From the Explorer tab, navigate to the IP Messaging System.
3 From the Properties tab, click Call Builder Config.
4 In the SIPProxy1 field, type the IP address of the primary call processor.
5 In the SIPProxy2 field, type the IP address of the secondary call processor.
6 Click Save All.
Configuring SIP
Registration
This section provides instructions on how to enable or disable SIP
registration (default is enabled) and how to configure the SIP Registration
interval. Registration is used to ensure that end points are able to receive
messages.
To configure the SIP Registration variables:
1 Log into EMS.
2 From the Explorer tab, navigate to the IP Messaging System.
3 From the Properties tab, click Call Builder Config.
4 In the SIPRegistrationEnabled field, choose true to enable SIP registration
or false to disable it.
5 In the SIPRegistrationInterval field, specify (in minutes) how often you
want SIP registration to occur. The default is five minutes.