Filter
Top Products
Copyright Agilent Technologies, Inc.
1994-2002
No part of this manual may be repro-
duced in any form or by any means
(including electronic storage and
retrieval or translation into a foreign
language) without prior agreement
and written consent from Agilent
Technologies as governed by the
United States and international
copyright laws.
Manual Part Number
33120-90017, March 2002
(order as 33120-90104 manual set)
Edition
Edition 6, March 2002
Edition 5, August 1997
Edition 4, February 1996
Edition 3, May 1994
Edition 2, March 1994
Edition 1, January 1994
Printed in Malaysia
Agilent Technologies, Inc.
815 14th Street S.W.
Loveland, Colorado 80537 U.S.A.
Assistance
Product maintenance agreements and
other customer assistance agreements
are available for Agilent Technologies
products. For assistance, contact your
nearest Agilent Technologies Sales
and Service Office. Further information
is available on the Agilent web site at
www.agilent.com/find/assist.
Trademark Information
Microsoft
®
and Windows
®
are U.S.
registered trademarks of Microsoft
Corporation. All other brand and
product names are trademarks or
registered trademarks of their
respective companies.
Certification
Agilent Technologies certifies that
this product met its published specifi-
cations at the time of shipment from
the factory. Agilent Technologies
further certifies that its calibration
measurements are traceable to the
United States National Institute of
Standards and Technology, to the
extent allowed by that organization’s
calibration facility, and to the calibra-
tion facilities of other International
Standards Organization members.
Warranty
The material contained in this
document is provided “as is,” and
is subject to being changed, with-
out notice, in future editions.
Further, to the maximum extent
permitted by applicable law,
Agilent disclaims all warranties,
either express or implied with
regard to this manual and any
information contained herein,
including but not limited to the
implied warranties of merchant-
ability and fitness for a particular
purpose. Agilent shall not be
liable for errors or for incidental
or consequential damages in
connection with the furnishing,
use, or performance of this docu-
ment or any information contain-
ed herein. Should Agilent and the
user have a separate written
agreement with warranty terms
covering the material in this docu-
ment that conflict with these
terms, the warranty terms in the
separate agreement will control.
Technologies Licenses
The hardware and/or software
described in this document are
furnished under a license and may
be used or copied only in accordance
with the terms of such license.
Restricted Rights Legend
If software is for use in the perform-
ance of a U.S. Government prime
contract or subcontract, Software is
delivered and licensed as “Commercial
computer software” as defined in
DFAR 252.227-7014 (June 1995),
or as a “commercial item” as defined
in FAR 2.101(a) or as “Restricted
computer software” as defined in
FAR 52.227-19 (June 1987) or any
equivalent agency regulation or con-
tract clause. Use, duplication or
disclosure of Software is subject to
Agilent Technologies’ standard
commercial license terms, and non-
DOD Departments and Agencies of
the U.S. Government will receive no
greater than Restricted Rights as
defined in FAR 52.227-19(c)(1-2)
(June 1987). U.S. Government users
will receive no greater than Limited
Rights as defined in FAR 52.227-14
(June 1987) or DFAR 252.227-7015
(b)(2) (November 1995), as applicable
in any technical data.
Safety Notices
Do not install substitute parts or
perform any unauthorized modifica-
tion to the product. Return the
product to an Agilent Technologies
Sales and Service Office for service
and repair to ensure that safety
features are maintained.
WARNING
A WARNING notice denotes a hazard.
It calls attention to an operating proce-
dure, practice, or the like that, if not
correctly performed or adhered to,
could result in personal injury or death.
Do not proceed beyond a WARNING
notice until the indicated conditions
are fully understood and met.
CAUTION
A CAUTION notice denotes a hazard.
It calls attention to an operating proce-
dure, practice, or the like that, if not
correctly performed or adhered to,
could result in damage to the product
or loss of important data. Do not
proceed beyond a CAUTION notice
until the indicated conditions are
fully understood and met.
Earth ground symbol.
Chassis ground symbol.
WARNING
Only qualified, service-trained person-
nel who are aware of the hazards
involved should remove the cover from
the instrument.
WARNING
For continued protection against fire,
replace the line fuse only with a fuse
of the specified type and rating.
Inside Front Cover (English Service Guide)