Filter
Top Products
Table 1-2. HP 16532A Operating Characteristics (cont.)
SETUP AIDS
Autoscale:
Autoscales the vertical and horizontal ranges, offset, and trigger level to display
the input signals. Requires a frequency between 50 Hz and 250 MHz.
Presets:
Scales the vertical range, offset, and trigger level to predetermined values for
displaying ECL or TTL waveforms.
Calibration:
Vertical, trigger, delay, and all defaults. Calibration factors stored in NV-RAM on
the circuit board.
Probe Compensation Source:
External BNC supplies a square wave approximately 0.0 mV to -800 mV into the
open circuit at approximately 1000 Hz.
OPERATING ENVIRONMENT
Temperature:
Instrument, 0° to 55° C (+ 32° to 131° F). Probes and cables, 0° to 65° C (+ 32°
to 149° F).
Humidity:
Instrument, up to 95% relative humidity at + 40° C (+ 104° F). Recommended
disk media, 8% to 80% relative humidity at + 40° C (+ 104° F).
Altitude:
To 4600 m (15,000 ft).
Vibration
Operation:
Random vibration 5-500 Hz, 10 minutes per axis, ~ 0.3 g (rms).
Non-operating:
Random vibration 5-500 Hz, 10 minutes per axis, ~ 2.41 g (rms); and swept
sine resonant search, 5-500 Hz, 0.75 g (0- peak), 5 minute resonant dwell @ 4
resonances per axis.
HP 16532A - General Information
1-8