Filter
Top Products
14
206-4271
EZ-Manager Wizard
Initiate the EZ-Manager Wizard
After you select the “EZ-Manager” option from the Setup Wizard Welcome screen, an EZ-Manager
Welcome screen provides a brief introduction to the EZ-Manager Wizard.
Note: Each EZ-Manager Wizard step is allotted a time frame after which the wizard proceeds without
user interaction. If the Pro:Centric server is congured on the system and if no location-specic
settings are required in the TV, for example, TV Zone, Wi-Fi Zone, Label, and/or Room Number
settings, from this point, the wizard can proceed through each of the conguration steps with no
further user interaction.
WELCOME TO LG’S EZ-MANAGER WIZARD
EXIT
NO PRO:CENTRIC
.
Use this setup wizard to configure the TV for Pro:Centric and/or Free-To-Guest (FTG) operation.
Select NEXT to continue.
.
If a Pro:Centric Server will not be installed and/or you do not wish to use the wizard to configure this TV for FTG
Mode, you may exit the wizard.
Select NO PRO:CENTRIC to disable the Pro:Centric feature of this TV, or select EXIT to quit.
This setup wizard will start automatically in 10 seconds.
NEXT
Note: If there is no user action in this screen within 10 seconds, the wizard will proceed to the next
conguration step. Once the wizard has proceeded, it is not possible to return to the EZ-Manager
Welcome screen; however, if you simply wish to exit the wizard, you can do so by selecting the
“EXIT” button from the subsequent screen(s).
From the EZ-Manager Welcome screen, you have the following options:
• To proceed with the EZ-Manager Wizard, use the arrow keys on the Installer Remote to select/
highlight NEXT and press OK. Then, continue to the “TV Conguration Options” section on the
following page.
• To exit the EZ-Manager Wizard, but retain the use of the Pro:Centric remote management feature
on this TV (i.e., Installer Menu item 119 DATA CHANNEL set to 255) in the future, use the arrow
keys on the Installer Remote to select/highlight EXIT and press OK. In the conrmation pop-up
window, select OK, and then press OK once more on the Installer Remote.
• If you do not intend to install a Pro:Centric server on this system and you do not wish to use the
EZ-Manager Wizard’s Zoning or USB conguration options, exit the wizard as follows: Use the
arrow keys on the Installer Remote to select/highlight NO PRO:CENTRIC and press OK. This
will disable the Pro:Centric feature of this TV (i.e., Installer Menu item 119 DATA CHANNEL will
be set to 0) and exit the EZ-Manager Wizard. In the conrmation pop-up window, select OK, and
then press OK once more on the Installer Remote.