Filter
Top Products
27
206-4271
Express Script (Cont.)
(Continued from previous page)
Note: If an Aux input will not be used, it is advisable to disable it. After the TV setup is
transferred to the PTC (see step 7), the only way to remove Aux inputs from the PTC Channel
Map, is to go to the Channel Preview/Banks Setup Menu and select Normal-Deleted.
3. Use the arrow keys on the Installer Remote to select the appropriate speaker conguration:
• Highlight/select the desired speaker—Pillow Only (default), TV Only, or Pillow & TV. Then,
press OK.
• If applicable, select the pillow speaker code/voltage and press OK.
Note: If using a Pro:Centric pillow speaker (LG IR codes) or a pillow speaker with Zenith IR
codes, make sure the “Zenith” pillow speaker code (default) is selected.
When you have made your selection(s), use the arrow keys to select NEXT, and then press OK.
SPEAKER SELECTION
BACK
NEXT
Select the desired speaker configuration:
Pillow Only
TV Only
Pillow & TV
Pillow Speaker Code/Voltage
Zenith
Philips
RCA
04
EXIT
4. In the Channel Tuning screen, you have the option to initiate an automated channel scan that
will search for all available analog and digital channels. Select RUN AUTO TUNING and press
OK on the Installer Remote to start the channel scan.
CHANNEL TUNING
Do you want to scan for available channels?
RUN AUTO TUNING
You MUST select RUN AUTO TUNING and press OK in order to run the channel scan. If you move on to the next step
without running Auto Tuning, there will be no analog or digital channels in the channel lineup.
05
BACK
NEXT
EXIT
(Continued on next page)