Filter
Top Products
23
206-4271
Initiate the Express Script
Note: While the Express Script enables you to set up TVs in lieu of cloning, you can also use an
Express Script TV Setup for cloning purposes (clone programmer only), if desired. However, note
that TV setup menu customization via the Express Script is limited to Channels Menu options.
After you select the “Express Script” option from the Setup Wizard Welcome screen, an Express
Script Welcome screen provides a brief introduction to the Express Script.
WELCOME TO THE EXPRESS SCRIPT
EXIT
Use the Express Script to set up the essential items for hospital TV viewing applications.
If a Pro:Centric Server is installed, the Express Script also enables you to configure the Pro:Centric
settings on the TV.
Select NEXT to continue, or select EXIT to quit.
NEXT
From the Express Script Welcome screen, you have the following options:
• To proceed with the Express Script, use the Left/Right arrow keys on the Installer Remote to
select/highlight NEXT. Then, press OK on the Installer Remote.
Note: Select this option even if you only intend to congure the Pro:Centric settings on this TV.
After you congure the Pro:Centric settings, you will have the option to exit without completing
the remainder of the wizard, if desired.
• To exit the Express Script without completing any conguration, use the Left/Right arrow keys
on the Installer Remote to select/highlight EXIT and press OK. In the conrmation pop-up window,
select OK, and then press OK once more on the Installer Remote.
Congure Pro:Centric Settings
The next screen enables you to set up the Pro:Centric feature of the TV (see screen examples
on following page). By default, the Data Channel is congured for Auto Search, which enables
the TV’s Data Channel Auto Search feature to set the Data Channel value. See item 119 DATA
CHANNEL description on page 44 for further information on the Data Channel Auto Search
feature. The Pro:Centric Application Mode default setting is “Conguration Only,” which enables
remote management only. That is, the TV will search for TV E-Z Installation data downloads;
however, Pro:Centric application data will not be downloaded, i.e., Installer Menu item 098
PRO:CENTRIC will be set to 0.
Express Script