Filter
Top Products
18
206-4271
(Continued from previous page)
If the process is successful, no further user interaction is required, though, in some instances, where
the option (for example “NEXT”) is available, you may manually move forward to subsequent steps
within the wizard to speed up the process.
PROCESSING THE PRO:CENTRIC CONFIGURATION
Downloading the Pro:Centric application files takes a few minutes.
Please wait...
2%
Retrieving files from data channel 70
Application files In progress...
Maintenance Files Synchronizing...
Warning - Do not remove AC power or the signal cables during these steps.
03
Note: If, after completing the search, the TV is unable to nd the Pro:Centric data channel (while
the Searching for Pro:Centric Server screen is on display), the wizard will stop and show a
Diagnostics screen that enables you to manually return to the previous screen (to reinitiate the
conguration) or exit the wizard.
When the Pro:Centric Conguration is complete, an EZ-Manager Conguration Complete screen is
displayed (see example below), and after 10 seconds, the wizard exits, and the TV turns OFF.
Installed Components
Pro:Centric Application GEM application downloaded
Maintenance Files LYH_Config.tlx
TURN OFF
REBOOT
EZ-MANAGER CONFIGURATION COMPLETE
TV will turn o in 10 second(s)
Installed Components
Pro:Centric Application GEM application downloaded
Maintenance Files LY770M_Config.tlx
TURN OFF
REBOOT
04
Note: With the EZ-Manager Conguration Complete screen on display, you can also manually turn
off or reboot the TV. If desired, select TURN OFF or REBOOT, respectively, and then press OK on
the Installer Remote.
EZ-Manager Wizard (Cont.)