Filter
Top Products
Return to Section TOC Return to Section TOC Return to Section TOC Return to Section TOC
Return to Master TOC Return to Master TOC Return to Master TOC Return to Master TOC
STRAIN
RELIEF
CLAMP
CONTROL
CABLE
ELECTRODE
CABLE
5. Connect the input control cable polarized
Amphenol plug into the mating 6-pin receptacle
on the rear of the control section.
6. Referring to Figure A.2, install the input cable
under the wire reel mounting stand strain relief
clamp. Remove the screws holding the clamp to
the base of the wire reel mounting assembly, put
the input cable assembly under the clamp and
reinstall the screws.
LN-7 GMA WIRE FEEDER
INSTALLATION A-5
FIGURE A.2 – STRAIN RELIEF CLAMP.