Filter
Top Products
OM-196 188 Page 118
1 Ramps Display
The ramps function allows output
power to be tapered from start to
weld and/or from weld to crater.
2 Program Number
Choose the desired program num-
ber (1 through 8). Turns start and/or
crater ramping On or Off as desired.
3 Start Display
Turns start ramping On or Off as de-
fined.
4 Crater Display
Turns crater ramping On or Off as
defined.
14-21. Setting Ramps Function
> Prog 2
Start Off
Crater Off
> Prog 1
Start Off
Crater Off
Prog 2
> Start Off
Crater Off
Prog 2
> Start On
Crater Off
12
3
Prog 2
Start On
> Crater Off
Prog 2
Start On
> Crater On
Press Mode
Select
Increase
Parameter
Select
Increase
Access
Setup
Display
Parameter
Select
Increase
Monitor
Stick
> Ramps
Exit
4
1 Example Version Number
Display
When talking with service
personnel, this number may be
required. (Check actual unit display
for number.) The factory keeps this
number on file with the serial num-
ber of the unit.
1
Stick
Ramps
> Software
Exit
Version
# 123456Z
14-22. Software Version Number
Press Mode
Select
Access
Setup
Display
1 Exit Setup Menu Display
Allows user to exit setup menu with-
out cycling power.
1
Stick
Ramps
Software
> Exit
Exit Setup
Menu Now
Press
14-23. Exiting The Setup Menu
Press Mode
Select
Access
Setup
Display