NETGEAR UTM25-100NAS Router User Manual


 
ProSecure Unified Threat Management UTM10 or UTM25 Reference Manual
4-14 LAN Configuration
v1.0, September 2009
The Known PCs and Devices table lists the entries in the Network Database. For each PC or
device, the following fields are displayed:
Checkbox. Allows you to select the PC or device in the table.
Name. The name of the PC or device. For computers that do not support the NetBIOS
protocol, the name is displayed as “Unknown” (you can edit the entry manually to add a
meaningful name). If the PC or device was assigned an IP address by the DHCP server,
then the name is appended by an asterisk.
IP Address. The current IP address of the PC or device. For DHCP clients of the UTM,
this IP address does not change. If a PC or device is assigned a static IP address, you need
to update this entry manually after the IP address on the PC or device has changed.
MAC Address. The MAC address of the PC or device’s network interface.
Group. Each PC or device can be assigned to a single LAN group. By default, a PC or
device is assigned to Group 1. You can select a different LAN group from the Group
pull-down menu in the Add Known PCs and Devices section or on the Edit Groups and
Hosts screen.
Action. The edit table button that provides access to the Edit Groups and Hosts screen.
3. As an optional step: To enable DHCP address reservation for an entry in the table, select the
checkbox for the table entry and click Save Binding to bind the IP address to the MAC
address for DHCP assignment.
Figure 4-5