Filter
Top Products
ProSecure Unified Threat Management UTM10 or UTM25 Reference Manual
Virtual Private Networking Using SSL Connections 8-3
v1.0, September 2009
The following sections explain the five configuration screens of the SSL VPN Wizard. On the
sixth screen, you can save your SSL VPN policy.
The tables in the following sections explain the buttons and fields of the SSL VPN Wizard screens.
Additional information about the settings in the SSL VPN Wizard screens is provided in
“Manually Configuring and Editing SSL Connections” on page 8-17 or in other chapters; each
section below provides a specific link to a section in “Manually Configuring and Editing SSL
Connections” on page 8-17 or to a section in another chapter.
SSL VPN Wizard Step 1 of 6: Portal Settings
Note that Figure 8-2 contains some examples. Enter the settings as explained in Table 8-1 on
page 8-4, then click Next to go the following screen.
Figure 8-2
Note: If you leave the Portal Layout Name field blank, the SSL VPN Wizard uses the
default portal layout SSL-VPN. You must enter a name other than SSL VPN in the
Portal Layout Name field so the SSL VPN Wizard can create a new portal layout.
Do not enter an existing portal layout name in the in the Portal Layout Name field,
otherwise the SSL VPN Wizard will fail (although the UTM will not reboot in this
situation).