NETGEAR UTM25-100NAS Router User Manual


 
ProSecure Unified Threat Management UTM10 or UTM25 Reference Manual
Monitoring System Access and Performance 11-9
v1.0, September 2009
Enable
(continued)
Select Logs to
Send
(continued)
IPS Logs. All IPS events.
SSL VPN Logs. All SSL VPN events.
IPSEC VPN Logs. All IPsec VPN events.
Content Filter Logs. All attempts to access blocked Web sites and
URLs.
Service Logs. All events that are related to the status of scanning
and filtering services that are part of the Application Security main
navigation menu. These events include update success messages,
update failed messages, network connection errors, and so on.
Portscan Logs. All port scan events.
Format Select a radio button to specify the format in which the log file is sent:
Plain text. The log file is sent as a plain text file.
CSV. The log file is sent as a comma separated values (CSV) file.
Select the Zip the logs to save space checkbox to enable the UTM to
compress the log file.
Size Select the Split logs size to checkbox to break up the log file into
smaller files, and specify the maximum size of each file in MB.
Send Logs via Syslog
Enable Select this checkbox to enable the UTM to send a log file to a syslog server.
SysLog Server The IP address or name of the syslog server.
Enable
(continued)
SysLog Severity All the logs with a severity that is equal to and above the severity that
you specify are logged on the specified syslog server. For example, if
you select LOG_CRITICAL as the severity, then the logs with the
severities LOG_CRITICAL, LOG_ALERT, and LOG_EMERG are
logged.
Select one of the following syslog severities:
LOG EMERG. The UTM is unusable.
LOG ALERT. An action must be taken immediately.
LOG CRITICAL. There are critical conditions.
LOG ERROR. There are error conditions.
LOG WARNING. There are warning conditions.
LOG NOTICE. There are normal but significant conditions.
LOG INFO. Informational messages.
LOG DEBUG. Debug-level messages.
Logs
Select the checkboxes to specify which logs are sent via the syslog
server. The “Select Logs to Send” part of the “Email Logs to
Administrator” section of the screen (see above) lists the same
checkboxes as the “Send Logs via Syslog” section of the screen.
Table 11-3. E-mail and Syslog Settings (continued)
Setting Description (or Subfield and Description)