Filter
Top Products
ProSecure Unified Threat Management UTM10 or UTM25 Reference Manual
4-10 LAN Configuration
v1.0, September 2009
4. Click Apply to save your settings.
Enable LDAP
information
Select the Enable LDAP information checkbox to enable the DHCP server to
provide Lightweight Directory Access Protocol (LDAP) server information. Enter
the settings below.
Note: The LDAP settings that you specify as part of the VLAN profile are used
only for SSL VPN and UTM authentication, but not for Web and e-mail security.
LDAP Server The IP address or name of the LDAP server.
Search Base The search objects that specify the location in the directory
tree from which the LDAP search begin. You can specify
multiple search object, separated by commas. The search
objects include:
• cn (for common name)
• ou (for organizational unit)
• o (for organization)
• c (for country)
• dc (for domain)
For example, to search the Netgear.net domain for all last
names of Johnson, you would enter:
cn=Johnson,dc=Netgear,dc=net
port The port number for the LDAP server. The default setting is
zero.
DNS Proxy
Enable DNS Proxy This is optional. Select the Enable DNS Proxy radio button to enable the UTM
to provide a LAN IP address for DNS address name resolution. This setting is
enabled by default.
Note: When you deselect the Enable DNS Proxy radio button, the UTM still
services DNS requests that are sent to its LAN IP address unless you disable
DNS Proxy in the firewall settings (see “Attack Checks” on page 5-20).
Note: Once you have completed the LAN setup, all outbound traffic is allowed and
all inbound traffic is discarded except responses to requests from the LAN
side. To change these default traffic rules, see Chapter 5, “Firewall Protection.
Table 4-1. VLAN Profile Settings (continued)
Setting Description (or Subfield and Description)