Filter
Top Products
ProSecure Unified Threat Management UTM10 or UTM25 Reference Manual
Virtual Private Networking Using SSL Connections 8-7
v1.0, September 2009
SSL VPN Wizard Step 3 of 6: User Settings
Note that Figure 8-4 contains some examples. Enter the settings as explained in Table 8-3 on
page 8-8, then click Next to go the following screen.
Portal The portal that you selected on the first SSL VPN Wizard screen.You cannot change
the portal on this screen; the portal is displayed for information only.
Authentication Server The server IP address or server name of the authentication server for any type of
authentication other than authentication through the local user database.
Authentication Secret The authentication secret or password that is required to access the authentication
server for RADIUS, WIKID, or MIAS authentication.
Workgroup The workgroup that is required for Microsoft NT Domain authentication.
LDAP Base DN The LDAP base distinguished name (DN) that is required for LDAP authentication.
Active Directory
Domain
The active directory domain name that is required for Microsoft Active Directory
authentication.
Figure 8-4
Note: Do not enter an existing user name in the in the User Name field, otherwise the
SSL VPN Wizard will fail and the UTM will reboot to recover its configuration.
Table 8-2. SSL VPN Wizard Step 2: Domain Settings (continued)
Setting Description (or Subfield and Description)