NETGEAR UTM25-100NAS Router User Manual


 
ProSecure Unified Threat Management UTM10 or UTM25 Reference Manual
3-8 Manually Configuring Internet and WAN Settings
v1.0, September 2009
6. Configure the Internet (IP) Address settings as explained in Table 3-3. Click the Current IP
Address link to see the currently assigned IP address.
7. Configure the Domain Name Server (DNS) servers settings as explained in Table 3-4 on
page 3-9.
Figure 3-6
Table 3-3. Internet (IP) Address Settings
Setting Description (or Subfield and Description)
Get Dynamically
from ISP
If your ISP has not assigned you a static IP address, select the Get dynamically
from ISP radio button. The ISP automatically assigns an IP address to the UTM
using DHCP network protocol.
Use Static IP
Address
If your ISP has assigned you a fixed (static or permanent) IP address, select the Use
Static IP Address radio button and enter the following settings:
IP Address Static IP address assigned to you. This address identifies the
UTM to your ISP.
Subnet Mask The subnet mask is usually provided by your ISP.
Gateway IP Address The IP address of the ISP’s gateway is usually provided by
your ISP.
Figure 3-7